The DCE/MNS205 is a 5-Port Industrial Ethernet (10/100Base-TX) Real-Time Redundant Ring Switch. RS-405 supports 10/100M auto-negotiation feature and auto MDI /MDIX function. It can automatically switch the transmission speed (10 Mbps or 100 Mbps) for corresponding connections. The connectors of Ethernet port are shielded RJ-45. The shielded RJ-45 connectors offer a high reliability Ethernet environment for industrial control and automation. Built-in ICP DAS Cyber-Ring technique that enable multiple switches to be placed into a redundant ring. It detects and recovers from a fiber or copper link failure within approximately 300ms – for the majority of applications a seamless process. Modbus/TCP, Modbus/RTU and OPC supported, SCADA application can monitor status of Ethernet port with Modbus or OPC protocol.RS-405 provides two power inputs that can be connected simultaneously to live DC power sources. If one of the power inputs fails, the other live source acts as a backup to automatically support the RS-405’s power needs. And, the relay output facility can deliver warning signal while dual power or network link failure.
  • Automatic MDI / MDI-X crossover for plug-and-play
  • Each port supports both 10/100 Mbps speed auto negotiation
  • Store-and-forward architecture
  • Full duplex IEEE 802.3x and half duplex backpressure flow control
  • 3.2Gbps high performance memory bandwidth
  • Frame buffer memory : 1 Mbit
  • Integrated look-up engine with dedicated 2 K unicast MAC addresses.
  • Redundant Power Inputs +10 ~ +30V DC Power failure alarm by relay output
  • Supports operating temperatures from -30°C ~ +75°C
  • DIN rail mount for industrial usage
Completely compliant IEEE 802.3, IEEE 802.3u, IEEE802.3x
Ethernet switch type Intelligent store & forward
MAC addresses supported 2K
Memory Bandwidth 3.2 Gbps
RJ45 ports (shielded) 10/100BaseT(x)
RJ45 speed (auto-negotiating) 10 Mbps or 100 Mbps
RJ45 auto-mdi/mdi-x All 5 ports
Ethernet isolation 1500 VRMS 1 minute
Required supply voltage +10 ~ +30 VDC
Power input isolation 1KV
Power consumption (Redundant input terminals) 5 W (typical – all ports active at 100 Mbps)
Case Plastic
Flammability UL 94V-0
Dimensions 64mm x 110mm x 97.5mm (W x H x D)
Installation DIN rail mount
Operating Temperature -30°C ~ +75°C
Storage Temperature -40°C ~ +85°C