Data Connect
Fiber-Tel Series 

fiber-tel-pic

DCE/Fiber-Tel is a fiber phone line and telephone converter extender is used to connect PSTN voice signals to distant Plain Old Telephone (POTS) devices. DCE/Fiber-Tel provides a fiber media transport for POTS transmission and features an RJ11C for copper connection. A pair of DCE/Fiber-Tel is a required implement to an end to end system. FXO mode connects to a telephone line or PBX and has the ability to detect ringing voltages and to act as telephone. FXS mode is the reciprocal unit and has the ability to act as PSTN and connects to a telephone device. When the DCE/Fiber-Tel card is placed in the DCE/RM20 with SNMP management, in-band allows viewing the card and remote converters status, type, version, fiber link status, on hook status and alarms. Both card and remote can be configured to enable or disable the port, reset the port and set the FXO or FXS mode.

Features

  • Extend telephone voice transmission from 2km to 120km over fiber
  • Network Management via terminal, web or SNMP in DCE/RM20 chassis
  • Support telephone voice transmission
  • Supports caller ID pass through
  • Selectable FXO or FXS mode
  • Support FXS to FXS hot line

fiber-tel-applications

Specifications

Ports
Connector:
1×9 (SC, ST, FC) or SFP LC

Optical Interface
Cable Type:
MM 62.2/125µm, 50/125µm. SM 9/125µm

Cable Length:
MM 2km, SM 15/30/50/80/120km,
WDM 20/40/60/80km

Wavelength:
MM 1310nm, SM 1310, 1550nm,
WDM 1310Tx/1550Rx (type A),
1550Tx/1310Rx (type B)

Electrical Interface
Connector:
RJ11

FXO:
Impendence: 600 ohms
Coding: 16 bits liner
Looping Current: 10~100mA
Ring Frequency: Acceptable 20~50Hz
Insertion Loss: 0.0± 1.0dB at 1000Hz

FXS:
Impendence: 600 ohms
Coding: 16 bits liner
Dial: DTMF and Dial Paul
Battery Source: 48VDC ± 4V

Ring Waveform: sine wave
Ringing Frequency:
20/25/30/50 Hz selectable
Ring Cadence:
FXS to FXS: On/ 1sec, Off/ 2sec
FXO to FXS: reduces that cadence detected by FXO
Insertion Loss 0.0 ± 1.0dB at 1000Hz
REN: 4.0B (Ring Equivalence Number)

LEDs:
Power, FX Link, Phone Act, Test

Power:
DC in 12V

Power Consumption:
<5W

Dimensions: (D x W x H) mm
155 x 88 x 23mm

Weight:
120g

Temperature:
0~50°C (Operating), 0~70°C (Storage)

Humidity:
10~90% non-condensing

Certifications:
CE, FCC, LVD, RoHS

MTBF:
65,000 h (25°C)

Ordering Information

fiber-tel-ordering-info