The Data Connect PE28.8
To service the growing need for efficient, reliable data communication in harsh environments of utility substations and industrial facilities, DCE has developed a series of OEM PCB modems that can operate a 5V logic (TTL) or simple send and receive signals and survive high surge levels and extreme heat and cold. All this without compromising the performance expected from state-of-the-art communication devices. With the rapid move toward “intelligent” substations, where meter, relays, RTU’s, SCADA systems, etc. are able to “talk” to a remote operator, communication devices such as modems are moving off the desktop and into the meters, RTUs, and SCADA units where the convenience of a standalone modem is unacceptable. Data Connect Enterprise has addressed this problem by developing the PE2.4, 9.6FPD, 14.4, 14.4L, 202T, and 28.8 OEM modems are highly sophisticated full duplex, V.22bis data modems that are designed to interface with RS232, RS485 (external devices), 5V logic (TTL) or simple send and receive signals. The PE2.4, 14.4 and 28.8 OEM modems operate at full of half duplex on a dial-up line. The PE202T, 14.4L and 9.6FPD OPM modems operate full duplex on 2 or 4 Wire leased line. The PE OEM PECs can be found in the MIU modems, MD modem cards, and MIU PowerPort modems.
- Modem Interface Unit 5V logic (TTL)
- Simple send and receive signals
- 2400kbps 2-wire dial –up line modem
- 5V logic (TTL) Power Supply IEC 801-4 surge protection
- -40°C to +85°C operating temperature
- For meters, relay, SCADA etc.
Modem Line Speeds:
Asynchronous 28800, 14400, 9600, 4800, 2400, 1200, 300bps
V.34, V.32bis, V.32, V.22bis, V.22, Bell 212A, Bell 103
Hayes Extended AT Command Set
5V logic (TTL)