The Data Connect MD14.4
The Data Connect MD14.4 is the rackmount version of the Data Connect MIU14.4 and MIU14.4-LV. The same functionality that can be found in the MIU14.4 and MIU14.4-LV can be found in the MD14.4. The Data Connect MD14.4 is a Bell V.32bis modem designed for asynchronous operation at 0 to 14400bps over voice grade lines. The modem is intended for use on two-wire dial lines. The MD14.4 is comprised of MDMC carrier card and PE 14.4 module. Up to 18 MD14.4 can front loaded into a MDR Modem Bank. The MDR Modem Bank is an industrial grade 19” x 3U rack mountable chassis. The MDR Modem Bank is powered from a wide range of AC or DC voltages. Two power supply cards can be installed to provide automatic back up in the event the primary power supply fails. The MDR will operate in temperatures from -20°C to +85°C and is surge protected on both power and analog lines. Two power supply slots are provided. Power supply cards are available for any voltage in the range 9-15VDC and 9-275VAC. A single power supply card will power all 18 MD14.4.In addition to the MD14.4 the MDR Modem Bank also houses the MD28.8, MD14.4L, MD9.6FPD and MD202T.
Features
- 14.4kbps 2-Wire Dial Line Modem
- IEC801-4 Surge Protection
- -20°C to +80°C Operating temperature
- For Meters, Relays, SCADA etc.
Specifications
Modem Line Speed:
Asynchronous 14000, 9600, 4800, 2400, 1200, 300bps
DTE Rates:
Above modem line speeds (IE; with data compression) 57.6, 38.4, 19.2kbps
Standards:
V.32bis, V.32, V.22bis, V.22, Bell 212A, Bell 103
Transmission Line:
2-Wire Dial
Compatibility:
Hayes Extended AT Command Set
Digital Port:
RS232 with DB9 Connector
Analog Port:
RJ11 Modular Jack
Surge Protection:
(Power Line) 8kV [Exceeds IEC801-4] (20kV {IE801-5} available if required)
Surge Protection:
3.75VAC
Environments:
-40°C to 85°C, 0 to 95% humidity (non-condensing)
Certifications:
FCC Part 68, Industry Canada
Ordering Information
DCE/MD14.4 V.32bis 14.4Kbps Rackmount Dial