The Data Connect PE202T
To service the growing need for efficient, reliable data communication in harsh environments of utility substations and industrial facilities, DCE has developed a series of OEM PCB modems that can operate at 5V logic (TTL) or simple send and receive signals and survive high sure levels and extreme heat and cold. All this without compromising the performance expected from state-of-the-art communication devices. With the rapid move toward “intelligent” substations, where meters, relays, RTUs, SCADA systems, etc. are able to talk “talk” to a remote operator, communication devices such as modems are moving off the desktop and into the meters, RTUs, and SCADA units where the conveniences of a standalone modem is unacceptable. Data Connect Enterprise has addressed this problem by developing the PE2.4, 9.6FPD, 14.4, 14.4L, 202T, and 28.8 OEM modems designed specifically for harsh environments. The PE OEM modems are highly sophisticated full duplex, V.22bis data modems that are designed to interface with RS232, RS485 (external device), 5V logic (TTL) or simple send and receive signals. The PE2.4, 14.4, and 28.8 OEM modems operate at full or half duplex on dial-up line. The PE202T, 14.4L and 9.6FPD OPM modems operate full or half duplex on 2 or 4 wire leased line. The PE OEM Specs can be found in the MIU modems, MD modem cards and the MIU Powerport modems.
Features
- Modem Interface Units 5V logic (TTL)
- Simple send and receive signals
- 2400kbps 2-wire dial-up line modem
- 5V logic power supply
- IEC801-4 surge protection
- -40°C to +85°C Operating temperature
- For meters, relays, SCADA etc.
Specifications
Modem Line Speeds:
0-1200bps
Standards:
Bell 202T
Transmission Line:
4-wire leased or private line
Compatibility:
Hayes Extended AT Command Set
Power:
5V logic (TTL)
Card Size:
3.4” x 0.01” x 0.5”
Digital Port:
DTE 8-pin, simple send/receive signals
Analog Port:
RJ11 modular jack
Surge Protection (Power Line):
8kV (exceeds IEC801-4) (20kV [IE801-5] available if required)
Surge Protection (Analog Line):
5kVAC
Environment:
-40°C to +85°C, 0-95% humidity (non-condensing)
Certifications:
FCC part 68, industry Canada
Ordering Information
DCE/PE202T Bell 202T 0-1200bps PCB 2/4-Wire Leased Line & Multi-polling