The Data Connect PE9.6FPD

To service the growing need for efficient, reliable data communication in harsh environments of utility substations and industrial facilities, DCE has developed a series of OEM PCB modems that can operate at 5V logic (TTL) or simple send and receive signals and survive high surge levels and extreme heat and cold. All this without compromising the performance expected from state-of-the-art communication devices. With the rapid move toward “intelligent” substations, where meters, relays, RTUs, SCADA systems, etc. are able to “talk” to a remote operator, communication devices such as modems are moving off the desktop and into the meters, RTUs, and SCADA units where the convenience of a standalone modem is unacceptable. Data Connect Enterprise has addressed this problem by developing the PE2.4, 9.6FPD, 14.4, 14.4L, 202T, and 28.8 OEM modems designed specifically for harsh environments. The PE OEM modems are highly sophisticated full duplex, V.22bis data modems that are designed to interface with RS232, RS485 (external device), 5V logic (TTL) or simple send and receive signals. The PE2.4, 14.4, and 28.8 OEM modems operate at full or half duplex on a dial-up line. The PE202T, 14.4L and 9.6PFD OPM modems operate full or half duplex on 2 or 4 wire leased lines. The PE OEM PECs can be found in the MIU modems, MD modem cards, and the MIU Powerport modems.


  • Modem Interface Units 5V logic (TTL)
  • Simple send and receive signals
  • 2400kbps 2-qire dial-up line modem
  • 5V logic (TTL) power supply
  • IEC801-4 surge protection
  • -40°C to +85°C Operating temperature
  • For meters, relay, SCADA etc.


Modem Line Speed:
Asynchronous 4800, 9600, 14000bps

V.27, V.29

Transmission Line:
2 & 4 Wire leased line

Hayes Extended AT Command Set

5V log (TTL)

Ordering Information

DCE/PE9.6FPD                        V.29 & V.27 9.6Kbps & 4.8Kbps PCB 2/4 Wire Leased Line & Multi-Polling