5-PORT 10/100 INDUSTRIAL ETHERNET SWITCH WITH POE
The Data Connect ANS205-PSE is a 5-port unmanaged PoE (Power-over-Ethernet) Industrial Ethernet switch, it supports 4 PoE ports which are classified as power source equipments (PSE).The Data Connect ANS205-PSE makes centralized power supply come true and provides up to 15.4 watts of power per port. The Data Connect ANS205-PSE can be used to power IEEE802.3af compliant powered devices (PD) by Ethernet cable and eliminates the need for additional power wiring.
- Automatic MDI/MDI-X crossover for plug-and-play
- Each port supports both 10/100Mbps speed auto negotiation
- Store-and-forward architecture
- Full duplex IEEE 802.3x and half duplex backpressure flow control
- 3.2 Gbps high performance memory bandwidth.
- Power Inputs +46 ~ +55V DC
- DIN rail mount
- IEEE 802.3af Compliant PoE Ports
- Four PoE ports with Power Sourcing Equipment (PSE) operation
- Auto-detection of PD (powered devices) and automatic power management
- Over-temperature, over-current and over/under-voltage detection
| Technology | |
| Standards | IEEE 802.3, 802.3u, 802.3x ,802.3af (Power over Ethernet) |
| Processing Type | Store & forward, wire speed switching |
| MAC Addresses | 1024 |
| Memory Bandwidth | 3.2 Gbps |
| Frame buffer memory | 512 Kbit |
| Flow Control | IEEE802.3x flow control, back pressure flow control |
| Interface | |
| RJ45 ports | 10/100 Base-TX auto negotiation speed, F/H duplex mode, and auto MDI/MDI-X connection |
| LED Indicators | Power, 10/100M, Link/Act . |
| Ethernet Isolation | 1500 Vrms 1 minute |
| Frame Ground for EMS Protection | Yes |
| Cable | Ethernet : 2-pair UTP/STP Cat.3,4,5, EIA/TIA-568 100-ohm |
| Fast Ethernet : 2-pair UTP/STP Cat. 5, EIA/TIA-568 100-ohm | |
| Power Input | |
| Input Voltage Range | +46 ~ +55VDC for PoE output |
| Power consumption | 1.3A@48VDC, +/- 5% arrowed |
| Protection | Power reverse polarity protection |
| Frame Ground for EMS Protection | Yes |
| Connection | 3-Pin Removable Terminal Block |
| PoE Output | |
| PoE Compliance | 100% IEEE 802.3af compliant |
| PoE Classification | PSE (Power Sourcing Equipment) |
| PoE Voltage | +46 ~ +48 VDC depending on power input |
| PoE Power | Up to 15.4 watts per channel |
| PoE Operation | Automatic detection and power management |
| Mechanical | |
| Casing | Plastic |
| Flammability | UL 94V-0 |
| Dimensions | 33 mm x 107 mm x 99 mm (W x L x H) |
| Installation | DIN rail mount |
| Environmental | |
| Operating Temperature | -40 ~ +75°C |
| Storage Temperature | -40 ~ +85°C |
| Ambient Relative Humidity | 10% to 90% RH, non-condensing |
| Data Connect ANS205-PSE | Unmanaged Ethernet switch with 4 PoE and 1 RJ45 uplink (RoHS) |